New IOGP Standard Aims To Improve Fabrication Site Safety
Standardization has become a popular term amongst operators looking to stem the rising costs of capital projects, and a new set of recommended practices from the International Oil and Gas Producers (IOGP) Association seeks to further that trend.
At a presentation held during the 2017 SPE Annual Technical Conference and Exhibition, Nilesh Popat discussed the key aspects of IOGP 577, which deals with fabrication site construction safety practices. Popat, general manager of HSSE for deepwater projects at Shell International Exploration and Production and the task force lead of the IOGP Project for Construction Site Safety Practices, also spoke about the challenges that may come with successful implementation of the new standard across the industry.
Popat said the task force was borne out of the recognition that, despite a noticeable improvement in safety performance in recent years, fatalities and significant injuries at fabrication sites were still too commonplace. Comprising construction safety specialists from IOGP members such as Shell, ExxonMobil, Statoil, Total, BP, and Chevron, the task force sought to develop a set of common minimum industry construction safety recommended practices for the work carried out at fabrication sites.
“It is a lot of feedback from third-party [fabrication] yards, construction contractors, of what we as an industry ask of them,” Popat said. “With BP, Shell, and other oil majors, it’s very different from site to site, from project to project, so can we not collaborate and come up with a common industry practice?”
Published in February, IOGP 577 is a series of “must have” requirements for a set of hazardous activities performed at fabrication sites. The task force selected 13 areas of focus for the recommended practices and general requirements:
- Confined space entry
- Dropped objects
- Energy isolation/lock-out, tag-out
- Construction traffic interface
- Lifting and hoisting
- Job safety analysis/permit to work
- Personal protective equipment
- Simultaneous operations
- System testing
- Working at heights
- Working with electricity
For these identified areas, the task force found common existing practices and suggested additional improvements that would make the guidelines better understood and easier to follow. Popat said it was important to limit complexity in the standard.
“The recommended practices are two pages, maybe three pages maximum, per hazardous activity. The intent is not to be gold-plated. The intent is to be practical and pragmatic, and for the requirements in place to be very easy to implement on sites,” he said.
Popat said IOGP 577 should benefit the industry in several ways. The standard may provide a step change in safety performance at fabrication sites. He said the use of a standard should also lead to improved productivity and schedule delivery, which may reduce operator costs. However, he said that the standard will not be effective without consistent support and application by operators, and that the task force’s priority has shifted from publication to adoption.
As the time of writing, Popat said five companies have committed to adopting IOGP 577: Shell, BP, Eni, Total, and Kosmos. Exxon, Chevron, and Statoil are currently going through the approval process. Popat said that he expects commitment papers from all eight companies in a few weeks, and afterward the task force will address the wider IOGP membership and construction contractors on the possibility of adopting 577.
Johan Sverdrup Phase 1 Nearly Complete, Startup on Target
Lundin reports that the hookup and commissioning of installed facilities at the large North Sea field is progressing as planned. Phase 1 startup is still scheduled for November.
Is Optical Gas Imaging the New Solution for Methane Detection?
Thermal imaging helps operators maintain regulatory compliance on methane-emissions requirements. Optical gas imaging technology may be an answer in allowing for faster, more efficient inspections, but there are hurdles to its adoption. How can its widespread use become a reality?
Freeport LNG Train 1 Enters Final Commissioning Stage
The introduction of feed gas into Train 1 of the natural gas liquefaction and LNG export facility marks the transition from construction to startup. Upon startup, Freeport LNG will become the first world-scale electric LNG liquefaction plant in North America.
Don't miss out on the latest technology delivered to your email every two weeks. Sign up for the OGF newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
16 August 2019
12 August 2019
14 August 2019
14 August 2019